SOMETHING FISHY // Back in the early 1970s, Steve Lis created a surfboard design that has endured through the decades and is as valid today as it was almost 50 years ago. The Fish design has gone through just about every permutation and probably most shapers. The Something Fishy is a blend of the old template and Gerry's take on rails, bottom shape, and rocker. We like how it works and, if you are a Fish lover, we think you might too.
Surfboard edge:
"Learning how to ride inside the tube at places like the Pipeline, the Ala Moana Bowl and later on at Uluwatu and G-Land taught me the importance of a good hard edge. Rails with no edges don't hold in very well in a steep wall and especially in the tube. A good edge is also key to acceleration and generating speed whether a wave is hollow or mushy. Obviously a soft edge is more forgiving but I've always felt going fast was a better friend than hoping to save a bobbled turn. Not everyone thinks like me and if my rails have too much edge than you're used to... there is always sandpaper. A block and some 400 wet or dry sandpaper can knock down that edge. My recommendation is to give those hard edges a good chance before you resort to sanding them and you might make a new friend... SPEED. Going fast is way better than going slow. Keep paddling!" -Gerry Lopez, Owner/Shaper.
| 5'2" | 21" | 2.25" | 29.4L |
| 5'6" | 21.75" | 2.5" | 36.1L |
| 5'10" | 21.75" | 2.5" | 38.3L |
| 6'0" | 21.75" | 2.5" | 39.4L |
| 6'4" | 22" | 2.625" | 44.2L |
